Strip Control Floor Finish Remover

Click Here to Enlarge Picture

Strip Control is specifically designed to remove zinc-free floor finishes. Residue-free rinsing formula saves on labor. Superior non-ammoniated formula cuts through finish buildup without unpleasant odors. No neutralizing required. Dissolves multiple coats of finish using safer solvents and alkalis.

Store at room temperature. Do not mix with other cleaners or chemicals.

Where To Use

Use on all resilient, zinc-free, finished flooring.

Product Benefits Low odor Residue-free rinsing formula Non-ammoniated Non-flammable Fast acting

Mixing Instructions

Soil Buildup	Soil Buildup
Light to Moderate	1:4 (cold water)
Heavy	1:1 (cold water)

How to Apply

1. Vacuum or dust mop floor.
2. Mop diluted product liberally on a workable area.
3. Allow to penetrate for 10-15 minutes.
4. Agitate with mop to break up loose finish or scrub with a single-disc rotary scrubber using a stripping pad.
5. Use a wet vacuum to remove solution from floor. (Note: An auto-scrubber may be used instead of rotary scrubber and wet vacuum system.)
6. Rinse floor with clean mop and water.
7. Air dry. Then apply floor finish.

Available Sizes

Strip Control	Item #	Packaging	Shipping Wt. (lbs.)			Cube Size (ft.³)
Floor Finish Remover	38652-G4	4 x 1 Gallon		36			1.20