Carpet Control Concentrated 3-in-1 Cleaner

Click Here to Enlarge Picture

Carpet Control is a revolutionary concentrated carpet cleaner specially formulated to be 3 products in 1: traffic lane prespray, spot cleaner and extraction cleaner. No need for separate presprays or spot cleaners. Just mix with water according to the directions for the desired application.

Each dilution of Carpet Control safely cleans carpets without the use of detergents and harmful chemicals, thus eliminating the need for defoamer or additional rinsing agents. Unlike surfactant-based cleaners, which promote resoiling, fiber untwisting, matting and longer drying times, Carpet Control’s patented detergent-free technology suspends dirt and soils, reducing wear and damage to carpet appearance.

Prior to extraction cleaning, vacuum carpet thoroughly. Gently remove surface soils. Extract wet soils or blot up with a clean absorbent colorfast cloth. Try to keep as much of the soil as possible from penetrating into the carpet. Do not rub, as rubbing may alter the carpet texture.

NOTE: For first time use, test for colorfastness in an inconspicuous area before use. Certain stains may cause permanant discoloration and may be impossible to remove. Results may vary with carpets previously cleaned with surfactantbased carpet cleaners.

Where to Use

Carpet Control is a concentrated carpet cleaner for use with carpet extraction machines. Carpet Control may also be diluted for use as a traffic lane prespray and spot cleaner.

May be used with all types of liquid-extraction carpet cleaning equipment. NOTE: Prepare fresh dilutions daily.

Product Benefits Multi-purpose concentrate Traffic lane prespray, spot cleaner, extraction cleaner Reduces wear & drying time Detergent-free technology Non-hazardous; safe to use No defoamer or extraction rinse agent needed Approved for use on wool and wool-blend carpets by the WOOLSAFE organization

How to Apply

Traffic Lane Prespray
Dilute 8 oz. Carpet Control per gallon of water (1:16) for application with an industrial sprayer. Adjust sprayer nozzle to spray position. Spray directly onto soiled area. Wait 5 minutes until soil loosens. Continue with extraction cleaning.

Spot Cleaning
Dilute 4 oz. Carpet Control per gallon of water (1:32) for application with an industrial sprayer. Adjust sprayer nozzle to spray position. Spray directly onto soiled area. Wait 5 minutes until soil loosens. Blot with a clean colorfast towel or continue with extraction cleaning.

Extraction Cleaning
Recommended dilution is 2 oz. Carpet Control per gallon of water (1:64). Follow manufacturer’s directions for specific machine used.

Available Sizes

Carpet Control	Item #	Packaging	Shipping Wt. (lbs.)			Cube Size (ft.³)
3-in-1 Carpet Cleaner	60252-G4	4 x 1 Gallon		36			1.20
	60252-5G	1 x 5 Gallon		45			1.35
	60252-35G	1 x 35 Gallon		315			7.40
	60252-55G	1 x 55 Gallon		495			11.40

 

Return to top